top of page
BG Traktor-min.jpg
Logo traktor-min.png

On this page, you will find all the information you need to check Phase compatibility and different setups with Traktor:

How to setup?

First of all, to get the best experience from using Phase with Traktor, make sure that the Traktor signal is selected in Phase Manager’s settings. 

Traktor Scratch Audio 6 DVS interface (Native Instruments)

1. Power your Phase via USB to any 5V power supply.

 

2. Plug the RCA cables from the Phase outputs to the A and B inputs of your Traktor Audio 6 interface. Then plug the RCA cable from the A and B outputs of your Traktor Audio 6 into the “Line” inputs of your mixer.

3. Connect the Traktor Audio 6 to your laptop via USB.

4. Open the Traktor Audio 6 Control Panel and make sure the “Input sens” is set on the “Line” signal.

5. Place your Remotes on top of your records and wait a few seconds for the calibration to be done before spinning.

Traktor Kontrol Z2 mixer (Native Instruments)

1. Power your Phase via USB to any 5V power supply.

 

2. Plug the RCA cables from the Phase outputs to the A and B inputs of your Traktor Audio 6 interface. Then plug the RCA cable from the A and B outputs of your Traktor Audio 6 into the “Line” inputs of your mixer.

3. Connect the Traktor Audio 6 to your laptop via USB.

4. Open the Traktor Audio 6 Control Panel and make sure the “Input sens” is set on the “Line” signal.

4. Place your Remotes on top of your records and wait a few seconds for the calibration to be done before spinning.

How to setup? Traktor

NOTE:

If you get the “Calibration failed” message on Traktor Pro, it is just a display of misinformation.You can manually disable it, by opening Traktor's preferences and uncheck the "Enable deck header warning" box in the Global settings menu.

DJ equipment compat - Traktor

DJ equipment compatibility

DVS mixers

Analog mixers with DJ soundcards

Controllers & All in one

- Traktor Kontrol Z2

- Traktor Audio 6,10

- Traktor S4

Phase Manager app - Traktor

The Phase Manager

Our configuration app, Phase Manager, is the first step in setting up your Phase for the first time, regardless of the DJ software you are using. It allows you to manage your Phase from making firmware updates to changing the LED colors of your Remotes!

COMPATIBILITY FOR MAC OS:

Recommended from macOS 10.12 and higher

MacOS.png

COMPATIBILITY FOR WINDOWS PC:

Recommended from Windows 10 and higher

Windows.png
bottom of page