.jpg)
PHASE
serato
OFFICIAL COLLABORATION
Upgrade to the next level!
We’ve teamed up with Serato to elevate your Phase experience to the next level: today, Phase becomes an Official Serato Accessory.
Main features
Plug'n'Play
From now on, Phase can be used without the need for RCA cables, communicating with Serato DJ Pro directly via HID. Simply connect the Receiver to your laptop via USB, and that's it! Enjoy this instant setup.
Improved Performance
Thanks to a powerful HID protocol, the communication between Phase and Serato DJ Pro is now much faster, offering a better accuracy and a foolproof stability. Digital control has never been so close to using real records!
A dedicated
experience with Serato
As an official Serato Accessory, Phase is now automatically detected by Serato DJ Pro, offering new dedicated features to enhance your DJ experience.
How to set up Phase in HID
Learn below how to set up your Phase with Serato DJ Pro via HID using just a USB cable! Check out our video tutorial or read our step-by-step guide:
1.
Open Phase Manager and update it to the latest version or directly download it here:
2.
Update your Phase to the newest firmware available. Once it’s done, make sure your Remotes are properly linked to the Receiver.
3.
Open Serato DJ Pro version 2.5 or higher. Then, simply connect your Receiver to your laptop via USB.
4.
Select the “WIR” deck mode in Serato DJ Pro to use Phase via HID.
5.
Place your Remotes on top of your records, and as usual, wait a few seconds for the calibration to be done.
Additional set up tips:
You can also run a Manual calibration via Phase Manager to
ensure your Remotes are spinning exactly at the right speed.
To do so, check out the Phase Manager settings.
Additional customized features
New wireless deck mode
A brand-new Wireless (WIR) deck mode, uniquely designed for Serato DJ Pro to communicate with Phase. Select “WIR” in the drop-down menu to control your tracks.
Emergency internal switch
In case your Remotes are running out of battery (5%), Serato DJ Pro automatically switches from WIR to INT mode to ensure the continuity of your performance.
Remotes battery level displayed
You can now monitor your Remotes' battery level directly on Serato DJ Pro,
at a glance.
Custom-designed
LED animations:
The Remotes now blink when a track is loaded, or when a track near its end (20 seconds left). The “Track End warning” box must be checked in the Serato settings.
If you already own Phase, continue with the instructions below.
If you’re new, you can grab your Phase here:
Become a part of
the Phase revolution
Try Phase with no strings attached: we offer a
14 days return period if you have a change of heart.
Each purchase includes free worldwide shipping!
