How to set up

Set up Phase withSerato DJ Pro

Whether you're new to Phase or already using it, find out all the essential information to set it up seamlessly with Serato.

You can use Phase and Serato in two ways:

Watch the tutorial to set up Phase via HID

Learn how to set up Phase with Serato DJ Pro via HID in less than 2 minutes, or scroll down to access our step-by-step guides.

HID setup overview

Follow the steps displayed  below to set up Phase with Serato DJ Pro via HID.

Diagram Demonstrating Phase DJ Controller Setup with Serato DJ Pro via HID

Step-by-step guide

Open Serato DJ Pro and plug your DVS interface to your laptop. It can be any DVS interface compatible with Serato (DVS mixer, DJ sound card, etc.)

Connect your Phase Receiver to your laptop via USB.

In Serato screen, set the deck control to “WIR” (the dedicated control mode for Phase).

Now, place the Magnetic Stickers on the records, followed by the Remotes. Wait a few seconds for the calibration to be done before spinning

You're all set!

Requirements

  • Your Phase is up to date to version 7 or above,
  • You’re using Serato DJ Pro from 2.5 or above
  • You use an interface enabling DVS Serato license. Check out the list of compatible hardware here.

Watch the tutorial to set up Phase via RCA

Learn how to set up Phase with Serato DJ Pro via RCA in less than 2 minutes, or scroll down to access our step-by-step guides.

RCA setup overview

You can use any DVS interface compatible with Serato (DVS mixer, DJ sound card, etc.) as long as it enables DVS Serato license.

List of compatible hardware here

Diagram Demonstrating Phase DJ Controller Setup with Serato DJ Pro via RCA

Step-by-step guide

Power your Phase Receiver via USB to any power supply (5V).

Plug your Phase Receiver to your DVS interface Line inputs via RCA.

Make sure your DVS interface’s input switches are set on Line/CD (if applicable).

Plug your DVS interface into your laptop via USB as usual for DVS.

Make sure Serato virtual decks are set on “REL” mode.

Place the Magnetic Stickers on the records, followed by the Remotes. Wait a few seconds for the calibration to be done before spinning.

You're all set!

Note: For some specific mixers (DJM-S11, Reloop Elite, etc.), you need to go to Serato settings > Audio tab > Click on CDJ.

Frequently asked questions

If you have any questions about Phase or how it works with Serato DJ Pro, read the answers below, or directly reach out to our product specialists!

Do I need a DVS license to use Phase?
Yes, to use Phase, you'll need to use an interface that enables DVS. Phase doesn't act as a DJ sound card.
Is Phase compatible with Scratch Live?
You can use your Phase with Serato Scratch Live. However, simply note that Phase Manager, the configuration software, is compatible with macOS, starting from version 10.12 and Windows 10. If your computer OS is older than these versions, you will need to configure, update and customize your Phase with a more recent laptop to use Phase Manager.
Can I use Phase with a controller as a mixer?
Yes, as long as your controller enables DVS. To learn more about the detailed setup check out our dedicated article on our Help center.
I'm not sure if my set up is compatible with Phase
If you have any doubts, don't hesitate to contact our product specialists. They will get back to you in less than 24 hours from Monday to Friday, Central European Time. Contact our team.
Is Phase compatible with other DJ software? (Traktor, Rekordbox, Virtual DJ, etc.)
Absolutely, Phase DJ controller is compatible with any DJ software enabling DVS. All you need is a laptop, a DVS interface and a turntable and you're good to go!
I have a problem to set up my Phase with Serato DJ Pro
If you have any problems with your Phase how to set it up or to configure it, our team is available to help you and answer any of your questions. They will get back to you in less than 24 hours from Monday to Friday, Central European Time. Contact our product specialists.